Kingston Technology ValueRAM 4GB DDR3L 1600MHz memory module 1 x 4 GB

 Description by quzo

kvr16ls11/4 4gb 1rx8 512m x 64-bit pc3l-12800 cl11 204-pin sodimm   valueram's 512m x 64-bit (4gb) ddr3l-1600 cl11 sdram (synchronous dram) 1rx8 low voltage memory module based on eight 512m  x 8-bit fbga components. the spd is programmed to jedec standard latency ddr3-1600 timing of 11-11-11 at 1.35v or 1.5v.

this 204-pin sodimm uses gold contact fingers.       features   • jedec standard 1.35v (1.28v ~ 1.45v) and 1.5v (1.425v ~ 1.575v) power supply • vddq = 1.35v (1.28v ~ 1.45v) and 1.5v (1.425v ~ 1.575v) • 800mhz fck for 1600mb/sec/pin • 8 independent internal bank • programmable cas latency: 11 10 9 8 7 6 • programmable additive latency: 0 cl - 2 or cl - 1 clock • 8-bit pre-fetch • burst length: 8 (interleave without any limit sequential with starting address “000” only) 4 with tccd = 4 which does not allow seamless read or write [either on the fly using a12 or mrs] • bi-directional differential data strobe • internal(self) calibration : internal self calibration through zq pin (rzq : 240 ohm ± 1%) • on die termination using odt pin • average refresh period 7.8us at lower than tcase 85°c 3.9us at 85°c < tcase < 95°c • asynchronous reset • pcb: height 1.18” (30mm) double sided component