Description by laptopoutlet
Phanteks XT Pro ATX Tempered Glass Case - Black Build the ultimate zero clutter gaming PC with the Phanteks XT Pro. This chassis is compatible with the innovative hidden connector motherboards produced by both MSI and ASUS, allowing for almost all cables to be hidden in the rear compartment. The XT Pro provides a selection of passthroughs, which give easy access to the cable connectors located on the back of these motherboards.
Alongside this inventive new technology, the Phanteks XT Pro also supports a wide range of gaming hardware such as modern GPUs, multiple storage drives, along with plenty of fans and radiators. The main chamber of this case has ample space for even the largest graphics card, with clearance for GPUs 415mm long and 184mm wide.
Moreover, keeping you PC at optimum temperatures is simple. There are a variety of options for both air cooling and water-cooling solutions, with clearance for large CPU tower coolers, room for up to three radiators to be installed simultaneously, as well as mounting points for up to ten fans. HIDE ALL YOUR CABLES The Phanteks XT Pro provides full compatibility with both the MSI Project Zero and ASUS BTF motherboards.
These innovative mainboards locate their cable connectors such as the 24-pin to the rear. To facilitate the unique requirements of these boards, the Phanteks XT Pro provides extra passthroughs from the main chamber to the rear compartment. This provides access to all the connectors, allowing for cables to be easily connected.
By doing this any cables required to power your PC are hidden away in the rear compartment of the chassis. Thanks to this, a gaming PC built with the XT Pro will feature almost zero visible cable clutter. However, the wires for components that cant draw their power from the motherboard, such as high-end GPUs, and AIO pumps will still need to be routed through the main chamber.
MID TOWER CASE WITH PLENTY OF SPACE With its spacious main chamber, the Phanteks XT Pro can easily accommodate the latest powerful gaming hardware. The motherboard tray can facilitate a wide range of boards, including ATX, Micro-ATX, Mini-ITX, and E-ATX models under 280mm wide. Alongside this, there is enough clearance for large CPU air coolers up to 184mm tall.
Perfect for efficiently cooling the latest CPUs from both AMD and Intel. Moreover, with a GPU clearance of 415mm, you can easily install a powerful graphics card such as an NVIDIA RTX 4090. Moreover, you will have plenty of space even with all these components installed to easily create aesthetically pleasing cable runs.
In addition to the main chamber, the Phanteks XT Pro also offers a spacious bottom compartment and ample cable management options. The bottom chamber of this case can contain your PSU, alongside a drive cage to mount up to two 3.5"" HDDs. Whats more, a removable bracket can also be mounted behind the motherboard tray, which can house up to three 2.5"" SSDs.
Whilst the drive cage is present in the bottom chamber, there is room for power supplies up to 270mm long to be installed, leaving plenty of room for cable management. LARGE SCALE COOLING Maintaining your gaming PC at optimum temperatures is simple with the Phanteks XT Pro. This is thanks to the exceptional compatibility with a range of cooling hardware.
There are three locations to mount radiators, which can all be utilised simultaneously. The top of the case can accommodate a 360mm radiator, meanwhile the front has space for a 240mm model, and a 120mm rad can also be supported by the rear panel. Alongside the excellent radiator options, a total of up to ten fans can also be installed within the Phanteks XT Pro.
Three 120mm fans can be mounted to the top and front of the case, alongside these an additional 120mm fan can be secured to the rear panel. Finally, three 120mm fans can be also located atop the PSU shroud, which draws air from the bottom chamber, directing air into your GPU increasing its cooling performance.
You can also utilise multiple 140mm fans with the XT Pro, there are mounting points for two fans at the top, three in the front, and a single fan at the rear. PHANTEKS XT PRO MID TOWER CASE AT A GLANCE : Mid tower design, with ample room for modern hardware Compatible with MSI Project Zero and ASUS BTF motherboards Supports up to ten fans for outstanding cooling Accommodates large components such as E-ATX motherboards and 415mm GPUs Crystal clear tempered glass side panel providing excellent view of all your components Fully featured front I/O with USB Type A and C ports Note: The content above is generic for the series.
For Correct info about this particular model, please refer to Specifications section.
Description by technextday
The Phanteks XT Pro Black ATX Case is perfect for building a clean and organized gaming PC. It works especially well with special motherboards from MSI and ASUS that hide most cables behind them. The XT Pro has holes that make it easy to connect these hidden cables. This Phanteks XT Pro Black ATX Case fits even the biggest graphics cards (up to 41.5 cm long and 18.4 cm wide).
It also has plenty of space for other parts like extra hard drives, fans, and water cooling systems. To keep your computer cool, you can choose between using big air coolers, installing up to 3 radiators at once, or adding up to 10 fans! Phanteks XT Pro Black ATX Case AT A GLANCE: Mid-tower design, with ample room for modern hardware Compatible with MSI Project Zero and ASUS BTF motherboards Supports up to ten fans for outstanding cooling Accommodates large components such as E-ATX motherboards and 415mm GPUs Crystal clear tempered glass side panel providing excellent view of all your components Fully featured front I/O with USB Type A and C ports Hide All Your Cables The Phanteks XT Pro Black ATX Case works great with special MSI Project Zero and ASUS BTF motherboards.
These motherboards have a special design that hides most cables behind them. The XT Pro case has holes that make it easy to connect these hidden cables and keep your PC looking super clean. Almost all the cables can be hidden in the back part of the case, thanks to the special design.
This makes your PC look neat, except for the wires from powerful graphics cards and water-cooling pumps that need to be plugged directly into the motherboard. Mid-Tower Case with Plenty of Space The Phanteks XT Pro Black ATX Case has a ton of space inside for all your gaming parts. It fits different-sized motherboards, even big ones like ATX.
There's also plenty of room for tall CPU coolers (up to 18.4 cm) to keep your processor from overheating. Plus, you can fit even the biggest graphics cards, like the NVIDIA RTX 4090, inside this case (up to 41.5 cm long). There's still space left for you to neatly arrange the cables after everything is installed.
This case even has a separate compartment at the bottom for your power supply and hard drives. You can put up to two big hard drives (3.5"") and three smaller ones (2.5"") inside. The space for the power supply is big enough (up to 270mm) so you'll have plenty of room to organize your cables.
Large Scale Cooling The Phanteks XT Pro Black ATX Case keeps your PC nice and cool with lots of room for fans and water cooling. You can install up to 3 radiators at the same time: a big 360mm one on top, a 240mm one in the front, and a smaller 120mm one in the back.
On top of that, you can also add up to 10 fans! There are spots for 3 fans each in the front and top, and 1 in the back. There's even room for 3 more fans on the bottom to blow cool air onto your graphics card. Specifications: Product Series/Family: XT Pro
