Phanteks Eclipse P600S Midi Tower Grey

 Description by technextday

Phanteks Midi Tower Gunmetal Grey Case: Striking Balance Between Style and Performance! The Phanteks Midi Tower Gunmetal Grey Case is a gunmetal grey ATX mid-tower case designed for PC enthusiasts. It boasts a tempered glass side panel, excellent cooling potential, and ample storage capacity. The Phanteks Midi Tower Gunmetal Grey Case also offers the unique option to house a secondary Mini-ITX system and supports vertical graphics card mounting for a sleek aesthetic.

Features: Superbly designed and crafted Midi-Tower supporting motherboards up to E-ATX Supports a dual system with the help of an optional bracket Tempered glass side door for easy access Integrated insulating material, removable for improved airflow if preferred 3x 140 mm fans pre-installed, total of 6x 140 mm and 7x 120 mm fans possible Radiators up to 420 mm compatible Supports GPUs up to 435 mm long, vertical installation optional, CPU coolers up to 190 mm 4x 3,5- and 3x 2,5"" slots, up to 10x 3,5 slots available I/O Panel with 1x USB 3.1 Type C- and 2x USB 3.0 Type A The P600 S from Phanteks offers both Form & Function The Midi Tower Gunmetal Grey Case from Phanteks stands out with its side panels.

The large tinted glass panel on the left swings open like a door. The same goes for the steel panel on the right. The front and roof panels come off easily. Behind them, there's a cool-looking mesh filter that helps keep noise down. You can take it off for better airflow.

A full seven 120 mm fans can be installed in the Phanteks P600S, three in the front, three in the roof, and one in the rear. Three 140 mm fans are supplied by Phanteks, with two installed in the front and one further in the back. On the back of the motherboard tray is a fan hub providing three 3-pin- and four 4-pin connectors.

Plenty of Space for Hard Drives and A Second System The P600S has also inherited the option, from the Evolv X, to install a massive number of hard drives. Four 3,5"" HDDs can be installed underneath the PSU shroud using the bundled brackets. A further six can be installed on the front of the motherboard tray.

The brackets needed (CM-02N-PT) are available from Phanteks as an accessory. The rear of the motherboard tray provides three slots for 2,5"" drives. The Phanteks P600S also offers the option of installing an additional Mini-ITX board in the case. This will require an additional bracket for purchase from Phanteks and comes with (CM-02U-PT) or without (CM-02J-PT) a riser cable.

This means that users have the option of installing a secondary system for dedicating to streaming or use as a server for virtual machines. Three Vertical Slots for Graphics Cards The Phanteks P600S allows for the vertical installation of graphics cards and even provides three slots for the purpose. A compatible x16 riser cable is not included with the case, but one is available from Phanteks themselves with the correct angle (CM-02T-PT, CM-02P-PT) since a vertically installed graphics card will be set right next to the PSU shroud.

For this purpose, there is also a recess for the PCI connectors equipped with a sliding cover. If no HDD brackets are installed in the front, then the graphics card can be up to 435 mm long. The overall impression when it comes to the Phanteks P600S is of unparalleled build quality, and could certainly be used for a workstation build or modding.

Specifications: Dimensions: Width: 240 mm Height: 520 mm Depth: 510 mm Weight: Approx. 13.5 kg Material: Steel Tempered glass (side) Colour: Gunmetal Grey Form Factor: E-ATX (up to 280 mm wide) ATX Micro-ATX Mini-ITX Total Possible Fans: Front: 3x 140/120 mm Roof: 2x 140 / 3x 120 mm Rear: 1x 140/120 mm Pre-installed Fans: Front: 2× 140 mm Rear: 1× 140 mm Radiator Mountings (forfeits HDD- and/or fan slots): Front: 1x max.

420/360 mm Rear: 1x max. 140/120 mm Roof: 1x max. 280/360 mm Filter: Front PSU (removable) Drive Bays: Internal: 4x 3.5"" (uncoupled; + 6x optional via separately available HDD bracket) 3x 2.5"" PSU: 1x Standard ATX (optional) Expansion Slots: 7 I/O-Panel: 1x USB 3.1 Type C 2x USB 3.0 1x Audio In/Out Max GPU Length: 435 mm Max CPU Cooler Height: 190 mm Max Front Rad Thickness + Fan: 95 mm Max Top Rad Thickness + Fan: 65 mm Includes: 3x 140 mm fans (pre-installed) 1x Fan hub (pre-installed) 4x Hard drive brackets, stackable 1x Vertical GPU bracket 1x Box of screws Lighting: No Product Series/Family: Eclipse Materials: Plastic Steel Tempered Glass Colour: Primary: Anthracite Secondary: Black