Kramer Electronics HDMI over Twisted Pair Transmitter AV transmitter Black

 Description by quzo

The PT571 is a DGKat twisted pair transmitter for HDMI signals. The PT571 converts an HDMI signal to a single twisted pair signal and the PT572 converts the twisted pair signal back to an HDMI signal.- Max. Data Rate - 1.65 Gbps.- HDTV Compatible.- HDCP Compliant.- DGKat Signal Integration - Kramers unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.

We strongly recommend using Kramer DGKat cables designed specifically for optimum performance.- HDMI Support - HDMI (V.1.4 with Deep Color x.v.Color Lip Sync HDMI Uncompressed Audio Channels Dolby TrueHD DTSHD).- 3D Pass-Through.- System Range - Up to 90m (295ft) at 1080i or up to 30m (98ft) at 1080p on shielded BCDGKat524 cable.

Up to 90m (295ft) at 1080i or up to 70m (230ft) at 1080p on shielded BCDGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BCDGKat7a23 cable.- Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use use Kramer's BCDGKat524 BCDGKat623 and BCDGKat7a23 cables.

Note that the transmission range depends on the signal resolution graphics card and display used. The distance using non Kramer CAT 5 CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.- EDID Pass Thru - Passes EDID signals between the source and display.- Status LED - Lights red when receiving power only orange when output and power are attached and yellow when both an active input and output are attached.- Power Connect System - A single connection to the transmitter powers the receiver.- Ultra-Compact Pico TOOLS - 4 units can be rack mounted sidebyside in a 1U rack space with the optional RK4PT rack adapter.